CENTER CONSOLE R&R

 

Included Operations
  • Remove and install or replace:
    1) Cowl top panel
    2) Cowl trim
    3) Weathercords and weatherstrips
  • Loosen and pull back carpet and insulation as required
  • Remove and replace caulking for standard factory application
Not Included Operations
  • Refinish cowl and dash
  • Remove and install:
    1) Engine
    2) Front door assemblies
    3) Front fender assemblies
  • Remove and install or replace:
    1) Windshield and moldings
    2) Air safety bag
    3) Instrument panel assembly
    4) Air conditioning and heater parts that interfere
    5) Wiring and/or wiring harness
    6) Bolted part and assemblies (example: wiper components, master cylinder)
  • Broken glass clean up

 

 

INSTRUMENT PANEL R&R

 

Included Operations
  • Disconnect and connect:
    1) Necessary wiring, hoses and cables
  • Remove and install
    1) Instrument cluster
    2) Standard gauges, switches and lamps
    3) Trim and attached parts (example: glove box)
    4) Heater/Air Conditioning controls if so equipped
    5) Release levers (example: brake, hood, fuel door, trunk)
  • Remove and install or replace:
    1) Passenger air bag
    2) Crash pad
    3) Standard audio system
    4) Attached brackets and reinforcements (non-welded type)
  • Loosen steering column for access
  • Test all necessary functions of electrical components for correct operation and reset as required
Not Included Operations
  • Refinish instrument panel or crash pad
  • Remove and install:
    1) Front seats
    2) Steering column
    3) Main wiring harness
  • Remove and install or replace:
    1) Windshield
    2) Optional equipment (example: electronic components, center console, cruise control)
    3) Control cables (example: hood release, remote mirrors)
    4) Remote mirrors
  • Repair/Rework parts (example: cut holes for modification)
  • Drill holes for installing trim
  • Broken glass clean up