FRONT/REAR/SIDE CARGO OR BACK DOOR R&R

 

Included Operations
  • Remove and install or replace:
    1) Lock cylinder
    2) Trim panel
  • Replace or transfer parts attached to door (example: outside handle, glass, run channels, regulator, vent assembly, weatherstrip)
  • Replace caulking for standard factory application if necessary
  • Replace clip type molding for base model vehicle (example: window surround molding, belt molding)
  • Remove and replace as an assembly

Not Included Operations

  • Refinish door panel
  • Replace channels attached to glass
  • Replace sound deadening
  • Remove and install or replace:
    1) Rear view mirror
    2) Weld-on type hinges
    3) Hinge anchor plates
    4) Decals (example: EPA, body identification, caution/danger)
    5) Restraint systems
  • Recode lock cylinder
  • Remove and install adhesive exterior trim; add to clean and re-tape
  • Replace new adhesive exterior trim
  • Install stripes, decals, transfers or overlays
  • Drill holes for installing exterior trim
  • Broken glass clean up
  • Remove from salvaged assembly:
    Trim panel
    Lock Cylinder

 

 

DOOR REPAIR PANEL R&R

 

Included Operations
  • Remove and install:
    1) Door assembly
    2) Trim panel
  • Remove and replace caulking for standard factory application
  • Remove and install or replace:
    1) Outside handle
    2) Lock cylinder
    3) Weatherstrip on door edge
    Belt molding/weatherstrip
  • Replace clip type molding for base model vehicle

Not Included Operations

  • Refinish door panel 
  • Replace sound deadening
  • Remove and install or replace:
    1) Glass, hardware, mirror and channels
  • Recode lock cylinder
  • Remove and install adhesive exterior trim; add to clean and re-tape
  • Replace new adhesive exterior trim
  • Install stripes, decals, transfers or overlays
  • Drill holes for installing exterior trim
  • Broken glass clean up

 

 

 DOOR GLASS R&R

 

Included Operations
  • Remove and install:
    1) Trim panel
    2) Garnish moldings
  • Remove and install or replace:
    1) Belt moldings if necessary
    2) Outside rear view mirror if necessary
    3) Watershield
    4) Parts attached to glass
  • Replace weatherstrip if so attached
  • Replace necessary adhesive/urethane
  • Clean up old adhesive in opening area
  • Align glass
  • Test for leaks

Not Included Operations

  • Remove and install or replace:
    1) Glass regulator and motor
  • Broken glass clean up