Included Operations

• Cut at base of roof line and at base of lock pillar or dog legs or windshield openings
• Remove and install or replace:
  1) Quarter trim
  2) Side and back glass, seals or moldings
  3) Rear seat
  4) Sill plates
  5) Rear bumper
  6) Luggage compartment trim
  7) Lock cylinder
• Loosen and pull back cloth type headliner, carpet or insulation as required
• Remove and replace caulking

• Refinish rear section
• Remove and install or replace:
  1) Preformed or molded headliner
  2) Restraint systems
  3) Suspension assembly
  4) Antenna
  5) Fuel tank Control cables (latch release, etc)
  6) Fluid lines
• Recode lock cylinder
• Remove from salvaged assembly:
  1) Trim panels Lock cylinder