ROCKER PANEL & CENTER PILLAR R&R

 

Included Operations
  • Remove and install:
    1) Rear door
    2) Front seat
    3) Quarter trim at sill
  • Remove and install or replace:
    1) Cowl trim
    2) Pillar trim
    3) Lock striker
    4) Sill plates
    5) Rear seat cushion
  • Loosen and pull back:
    1) Carpet and/or insulation as required
    2) Cloth type headliner at pillar
  • Cut center pillar below roof and rocker panel at base of door post and dog leg
  • Remove and replace inner and outer rocker panel and center pillar
  • Remove and replace caulking for standard factory application
Not Included Operations
  • Refinish center pillar and rocker panel
  • Remove and install:
    1) Front door 
    2) Preformed or molded type headliner
  • Remove and replace:
    1) Hinge pillar
    2) Lock pillar
    3) Quarter panel
  • Remove and install or loosen rear edge of front fender
  • Remove and install or replace:
    1) Door hinges
    2) Wiring and/or wiring harness
    3) Rocker molding
    4) Decals (example: EPA, body identification, caution/danger)
    5) Control cables (example: latch release
    6) Restraint systems
    7) Fluid lines
  • Drill holes for installing trim