ROCKER PANEL R&R

 

Included Operations
  • Remove and replace inner and outer panels
  • Cut at door posts, center pillar, lock pillar or dog leg
  • Remove and install or replace:
    Cowl side trim
    Center pillar trim
    Quarter trim at sill
    Sill plates
    Seats
  • Loosen and pull back carpet and insulation as required
  • Remove an replace caulking for standard factory application
Not Included Operations
  • Refinish rocker panel
  • Remove and install:
    1) Front or rear doors
  • Remove and replace:
    1) Hinge pillar
    2) Center pillar
    3) Lock pillar
    4) Quarter panel
  • Remove and install or loosen rear edge of front fender
  • Remove and install or replace:
    1) Rocker molding
    2) Wiring and/or wiring harness
    3) Control cables (example: latch release)
    4) Fluid lines
    5) Restraint Systems
  • Drill holes for installing trim